NUTOX Carbon Adsorbers are designed for the capture of organic vapors and fumes. They employ a high carbon contact time. NUTOX uses technical grade activated and is not rated for nuclear (radiodine) applications.

The NUTOX Radial Flow Adsorbers treat relatively large flows with a very low pressure drop. The activated carbon is contained in an annulus between two stainless steel screens attached to expanded metal. The NUTOX Radial Flow Adsorbers treat relatively large flows with a very low pressure drop. When an accumulator cabinet is used to house the radial flow adsorber, condensate drains and breakthrough indicators are provided. If conditions dictate, stainless steel can be substituted for carbon steel or an alternative coating can be provided. Flow can be reversed if preferred.

NOTES:

1) Nominal design flow may be conservative. Desired contact time may allow higher or lower flow rates.
2) Dry virgin activated or reactivated carbon provided as standard adsorbent.
3) Maximum adsorbent fill is based on a bed density of 29 lb/ft3.
4) Maximum adsorbent fill can differ based on variable bed density and alternate adsorbents.


Carbon Refill- Call for information
Breakthrough Indicator- HR09